-
#### Description
Not sure, if this is a bug or if I just configured it not correct. I already wrote an email, but I guess this setup is a bit too complicated for an email.
Fritzbox cable acts as a M…
-
*zorxd:*
On my Archer C7 v2, since the upgrade from 18.06 to 19.07, I sometimes get very high latency on my 5 GHz wifi network:
This is when pinging a wireless client from the router itself.
ping…
-
*NilsRo:*
Supply the following if possible:
- TP-Link C6 and Netgear r7800 (but read from it in every combination)
- have this since using OpenWRT 19.07
- Enable 802.11r with Generate PMK local…
-
*AidanPR16:*
I'm having a problem with TXPower with my MediaTek 2.4GHz radio on my R6220 Netgear unit flashed with the latest version of OpenWRT, changing the TX power down to 1 dBm all the way down …
-
I flashed Archer A6 V3 with OpenWRT 21.02.1 originally. 5GHz wasn't working. I got it to work by setting the channel to 36. Then I started tweaking other settings in Luci (like WPA3, power etc), and t…
-
```
root@openwrt:~/PPPwn_WRT-main# ./run.sh
---
/root/PPPwn_WRT-main/pppwn_mips: line 1: syntax error: unexpected "("
root@openwrt:~/PPPwn_WRT-main#
```
Since pppwn_mips is compiled I cannot r…
-
I am using WRC-2533GST2 with latest 21.02 snapshot (MT7621A + MT7615N*2). Thanks for developers, both 2.4GHz and 5GHz connections are stable.
The problem is 2.4GHz RX is slow. TX is about 110Mbps, wh…
-
*Cjcr:*
Hello,
As I said, if I change the TX power from 0 dBm to 20 dBm doesn't nothing. There isn't any visible change in tx power. I tested other powers too (5, 8, 15,..).
It is a Xiaomi Nano…
-
*Cjcr:*
Hello,
As I said, if I change the TX power from 0 dBm to 20 dBm doesn't nothing. There isn't any visible change in tx power. I tested other powers too (5, 8, 15,..).
It is a Xiaomi Nano…
-
I have three routers in my Lime mesh network, TP WDR 4300, TP Archer C50 V3 and V4.
All built the firmware according to the instructions.
What is the error?
Thu Dec 24 11:54:04 2020 daemon.not…