-
Here is the code - I am able to connect to the CME WIDI jack via ESP32 BLE. The Widi Jack is able to receive program / control changes from other devices e.g. Mainstage in mac or midipad in ios. Here …
-
Low volume with 8Ohm 2W speaker volume control does not seem to work.
-
Hi.
First of all, it's a great project, it's good to see that you can still get something out of such an old car. I did everything according to your project with minor hardware changes (I replaced th…
-
Issue:
Uploading a sketch to a SAMD51 device (Adafruit feather M4 Express, Adafruit M Metro, Alorium EVO) will intermittently fail with a "SAM-BA operation failed" error.
Platform: MacOSx and Li…
-
### Describe the problem
In order to make it easier for beginners to get started with writing Arduino sketches, and for the convenience of all users, Arduino CLI [automatically generates and adds p…
-
Now I have a 4-vote motor system in my pedals with an Arduino and motor driver. (channel1, channel2, channel3, channel4)
As a new project, I want to make a seat pad with 4 voting motors. For exampl…
-
I have no travel on the y axis. I have established that the motor, driver, and cable are all working. I can find no specific setting that wold disable the y axis only.
$$ shows v1.1z. I do have $8…
-
-
您好!非常感谢您的分享
您的分享是我目前所找到的所有分享中最为详细的一款
根据您的接线过程,我也尝试按照您的方式去驱动我的ak60-6
但是非常可惜,我并无法正常使我的电机进行旋转
当我在arduino软件中输入s,并且持续输入u时,电机并没有转动
请问您能提供一些建议或者帮助给我吗
非常感谢
-
Hello
I am currently trying to use a MKRZERO and a RFM95 module to connect to the TTN in order to periodically send and access sensor data. I have been trying to use this library for the past week…