-
hi, I would like to use the code with an esp8266 and the Arduino ide.
I tried to include the instructions from issue ESP32 Support #59.
I get the following error when compiling:
`146 | #error "Siz…
-
Did you ever get this to work inside the Arduino IDE? I've assembled everything so far and can program PIC via ICSP however I am having difficulty programming the Atmega328 chip via the Arduino IDE. T…
-
For setting up the LilyGO T-Echo in Arduino IDE, [the `README.MD` mentions to select *Adafruit nRF52* board ***Nordic nRF52840(PCA10056)***](https://github.com/Xinyuan-LilyGO/T-Echo/blame/537b5233f013…
-
I'm getting the following error when trying to verify via Arduino ide,Waveshare 2.9
Compilation error: 'obtain_wx_data' cannot be used as a function
-
`boards.txt` specifies the TRRS variant here:
https://github.com/adafruit/ArduinoCore-samd/blob/576d6271eddd694d13313dea7125add64be0d0e0/boards.txt#L914
The directory under `variant` all lower cas…
istnv updated
21 hours ago
-
Ideally one set of code that can be built with either Arduino IDE or Platform IO (definitely doable). I'll be working on this next.
-
### Describe the problem
```
./arduino-ide_2.3.2_Linux_64bit.AppImage
[49662:0505/163801.040968:FATAL:setuid_sandbox_host.cc(158)] The SUID sandbox helper binary was found, but is not configured cor…
-
in LovyanGFX example, just i see a black screen...
Waveshare ESP32 S3 Touch LCD 4.3
Arduino IDE 2.32
ESP32 Board package 2.0.17
LovyanGFX 1.1.16
can you help me?
-
### Board
ESP32-S3-DevKitC-1-N-32R8V
### Device Description
ESP32-S3-DevKitC with only USB serial cable attached.
### Hardware Configuration
n/a other than onboard RGB used in sketch.
…
-
is there anyway i can flash it through arduino ide?