-
Good afternoon, I have a
Axpert Plus Duo 3000-24 from Voltacon
Using Watchpower I can see and monitor my 2nd array (PV2) and can see it is fully working from both Watchpower and the LCD panel.
…
-
Hi,
I am using this successfully on on Axpert 5KVA, but not getting any data from another on the same hardware. I ran the debug and am getting the following:
Thu Jun 25 13:24:54 2020 INVERTER: D…
-
Hi guys,
i am very interrested in your project about connecting Axpert king over RS232/TCP converter to Home Assistant. Currently i read data from the inverter through Node-Red which is working, ther…
-
**Release v3.5.0-RC1**
Hi,
Doing some network test I realized that MQTT connection from SmartEVSE to Mosquitto broker is not restarted if a network comms fail happens.
When I start mosquitto…
-
### Is there an existing issue for this?
- [X] I have searched the existing issues
### Used Hardware?
Wemos D1 Mini
### What happened?
Hello,
I've just build the adaptor and installed Solar2MQ…
-
Not entirely sure why, but I'm getting the below error:
```
Logger: homeassistant.components.mqtt.mixins
Source: components/mqtt/mixins.py:270
integration: MQTT ([documentation](https://www.home…
-
### What device are you using?
Inverter: Axpert MKS IV 5.6K-48V
Inverter firm:
-Main CPU: 00074.01
-Secondary CPU: 00030.00
-Wifi Module: 3.1.1.0
Protocol detected: PI30
Solar2MQTT: V1.1.…
-
hi,
this inverter have 2 MPPT DEVICES.
with command
mpp-solar -p /dev/ttyUSB0 --getstatus
expose datas of one of two.
how to do this?
-
Hi, I would like some advice. I have a solar inverter: Effecta AX-P1
It has a USB2.0 type B data port that can be connected directly to a USB PC and I can monitor the data using the WachPower program…
-
Hi there,
I have a RCT-AXPERT VM2 Premium 1200W 12V I’m inverter that I’m trying to setup with my ESP32 dev board.
I have one of these https://www.communica.co.za/products/hkd-ttl-to-rs-485-modu…