-
Hi,
With this firmware we are unable to retrieve config (after reboot or with M501)
The problem is around a logic with AUTO_BED_LEVELING_BILINEAR in configuration_store.cpp, trying to read data whi…
-
### Bug Description
auto pid not working
### Bug Timeline
new
### Expected behavior
pid should work, it works manually with gcode commands
### Actual behavior
says 0% forever, says heating be…
-
### Description
Currently, G29 J2 appears to fit a plane, as after doing it, the surface at the probed points is not exactly zero. However, the only reason to use 4-point (or more) leveling rat…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I'm on UBL (bugfix-2.1.x, 071F0094)
Running G29 P1 probes the bed. Great. However, I g…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
Uploading a big file via wifi can cause overheat of the hotbed and hotend
### Bug Ti…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I have a simple click-switch probe which I manually mount to level the bed (attached to…
-
### Did you test the latest `bugfix-2.0.x` code?
Yes, and the problem still exists.
### Bug Description
I'm trying to accomplish the Z probe offset wizard, but when i start the wizard from LCD the …
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
After #25758 (More endstops refactoring) homing doesn't work anymore. When sending G28 …
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
- My intention is to use the 3d printer with a drag knife. Sometimes it's necessary to manually…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
The extruder fan would not turn on when reaching or exceeding 50 degrees C. Tried old stable …