-
Flasher mode: BK7231N
Going to open port: COM3.
Serial port open!
Getting bus... (now, please do reboot by CEN or by power off/on)
Getting bus failed, will try again - 0/100!
Getting bus failed, …
-
Hello, I have a BK7231 module with a 56-pin BK7231 chip on it. Can I apply OBK to it? I tried but didn't succeed, thank you!
The BK7231 module (C-3031) information:
http://www.c-chip.com.cn/userfi…
-
**Describe the bug**
After entering the "Config module" page, the device no longer responds to the page or ping. The router says that the device is still connected to Wi-Fi, basic operation like turn…
-
**Describe the bug**
When accessing device via builtin webpage it will become unavailable when selecting the "Configure Module" menu. The device will suddenly just stop responding with a "connection …
-
**Describe the bug**
Sometimes Digma DiPlug 200S turns off (without any mqt command) - about twice a day. But it only turns off under load, I didn't get any turns off without load. With the original …
-
After internet restart, the device is connecting to the wifi (I Can see it on my router connections, its there!)
But cannot ping to the device IP (Unreachable IP) . only physical touch is working.
D…
-
**Describe the bug**
When using the Show Header Toggle in HomeAssistant to power OFF two relays at the SAME time, the device will reboot.
when toggling independently, all works fine.
**Firmware:…
-
**Describe the bug**
Hello,
Device is slowly reconnecting to WiFi after swtching it on by Zigbee switch.
It takes about 3-5 min to reconnect.
When I pulled BK outside and connected it to serial t…
-
Somewhere between 1.17.366 and 1.17.375 the LittleFS files are being deleted.
Haven't had a chance to check what version it started from but could be #968 again
-
**Describe the bug**
A clear and concise description of what the bug is.
**Firmware:**
- Version 1.15.631
- Device Treatlife SS02
- Chip/model: BK7231T?
- Device config: All configurations
…