-
Heya,
I'm by no means an expert in compiling or with the BL808 in general and I'm stuck on the following error message after booting up my M1s Dock for the first time:
```
[ 0.155415] VFS: C…
-
So far on-clip WiFi is not working, a WiFi dongle on USB OTG could allow application developers to go on without waiting.
USB OTG does not seem working too :(
But it should be less dependent on (n…
-
I have following test firmware: [gpio_input_output_bl808_m0.bin.zip](https://github.com/bouffalolab/bl_mcu_sdk/files/10813716/gpio_input_output_bl808_m0.bin.zip)
I flashed it to Ox64. After that, I…
-
```
➜ pt git:(main) ✗ make CHIP=bl618 BOARD=m0pdock
/home/user/boufallo/M0P_BL618_examples/bouffalo_sdk/tools/cmake/bin/cmake -S . -B build -G "Unix Makefiles" -DCROSS_COMPILE=riscv64-unknown-elf- …
-
A while ago, I noticed that benchmark results on the BL808 were significantly lower on NuttX than on Linux. In coremark, NuttX scores ~18.3 while Linux scores 1141, which is over 60x faster. Messing w…
-
Recently, have started some tests with `regz` using some SVD's such as gd32v (which does not yet have cluster support), esp32-c3 and now [allwinner D1 (unofficial svd)](https://github.com/duskmoon314/…
-
Pending release of blobs or documentation from bouffalo.
See https://github.com/bouffalolab/bl_mcu_sdk/issues/85
-
After compiling an example successfully I now see the following errors (were not there a couple of weeks ago):
```
[100%] Built target iso11898_selftest_bl616.elf
/bin/sh: ./../../../../tools/bfl…
-
WiFi eats a lot of flash and nearly all of the RAM. The resulting flash is unreliable and flashing hangs at flash erase. But more importantly there's not enough ram left for a useful application.
`…
-
I would like to know if BT and WiFi drivers are working in linux version?