-
Hello,
could you write a few lines about compiling the firmware, please?
I want to use your code with STM32F411 MiniF4 (blackpill) and/or STM32F103 bluepill.
I have a poblem with libs/dependenci…
-
**Describe the bug**
This issue is similar to https://github.com/zephyrproject-rtos/zephyr/issues/67227 but has to do with _board-specific_ overlays defined within a shield directory in a Zephyr modu…
-
obsolete, useless?
thanks in advance
-
I was hoping to run this through a more-powerful STM32F4 Blackpill board (well, clone), but compile fails due to hard-include of AVR Watchdog Timer (not conditional on AVR-based board being used)
A…
-
As one can read in the discussion at https://community.platformio.org/t/robotdyn-blackpill-stm32f303cc-pio-has-wrong-max-ram-size/11521, the STM32F303CC chip (for which we have the board https://githu…
-
Приветствую. Пытаюсь найти рабочую библиотеку midiusb для stm . Наткунлся на Ваш код , сделал все как описано , откорректированный код скомпилировался и собрался без ошибок. Контроллер F411 на BlackPi…
-
### CircuitPython version
```python
Adafruit CircuitPython 7.0.0-alpha.6 on 2021-08-12; stm32f411ce-blackpill-with-flash with STM32F411CE
```
### Code/REPL
```python
import board
dir(bo…
-
Hello again.
BMFlash is unusable (without tweaks) against `blackpill-f411ce` platform and AT32F403A target.
Problem 1. vFlashErase throws an "Flash erase failed" error before even proceeding to vF…
-
**Describe the bug**
probe-rs fails to use the debugger on NXP's LPCxpresso54608 board
**To Reproduce**
Steps to reproduce the behavior:
1. program the JLINK firmware on the board using LPCscryp…
-
Flashing a uf2 firmware with only the `-bl uf2` flag in the command line causes the bootloader to overwrite itself.
Steps to reproduce:
1. firmware with `BOOTLOADER = stm32-dfu` in rules.mk
2. c…