-
Hi, I've been using the module for quite some days now and it was working all fine.
Suddenly since yesterday the module doesn't seem to get a network connection.
I use the same SIM on my phone and i…
-
Hi there, i bought a module SIM7000E and it seems to be crashing all the time, it looks like it is executing over and over "AT+CFUN=1", and its doing this because the "AT+CEDUMP=0", i checked if it wa…
-
I am trying to support Raspberry Pi 3. The linux driver code has the 7100 but not the 7000 listed.
When I try to compile on raspberry - jesse it gives error:
make[1]: *** /lib/modules/4.9.59-v7+/bu…
-
The Micro Python example does not work. When running the code it continuously returns:
[PPPOS CLIENT]: AT BAD RESPONSE: [..+CREG: 0,5....OK..]
I have tested the device using Arduino which does w…
-
is there any appetite to add a support for publishing data to Mosquitto? Been at it for days with no luck. Seems like every time I find libraries that support Mosquitto they conflict with the modified…
-
I have had 3 modules and on my 4 th ,, Everyone of the modules experience a loss of signal periodically , and are not dependable to be there when needed, I am trying to adapt another antenna on th…
-
Hi timothy ,
I bought the bioletics SIM7000 LTE/NB-IoT shield for Arduino and i am using hologram sim card i am getting the same error couldnt find fona
FONA basic test
22:33:03.064 -> Initiali…
-
Hi Timothy, I have connect the Battery Lipo with the SIM7000 but it seem the data show 'could'nt not find FONA'. Can you please help me?
⸮FONA basic test
Initializing....(May take several seconds)
…
-
- [x] ESP32 Wroom DevKitV1
- [x] Toolchain version: crosstool-ng-1.22.0-80-g6c4433a
- [x] Compiler version: 5.2.0
- [x] Arduino is used as a module inside of IDF
- [x] SIM7000-LTE-Shield lib versi…
-
Hello Timothy, I got an issue about the connector on the SIM7000. I have already purchased 3 battery lipo 3.7v with JST connector but it does'nt work out. The connector is not compatible with the conn…