-
Hi everyone, I'm running an ender 3 with latest marlin 1.1.x-bugfix and I'm encountering an issue with my BLTouch v3 (I've removed the interfering capacitor from the mainboard). I've had this printer …
-
1. Can you please make auto bed leveling adaptive so I know if there is a corner on my bed that performs poorly with auto bed leveling I can create a separate front, right, back, left bed leveling zon…
-
### Description
X axis (and X axis only) moves 16x too much. Looks like the driver receives or interprets steps insteed of microsteps : 10mm -> 160mm, with crazy speed and acceleration
### S…
-
Although the silicone heater can reach 60C from ambient in about 1 minute, the combined thermal mass of the aluminum bed and the Buildtak magnetic plate take about 5 minutes to finish thermally expand…
-
The current elastic band tabs can print at the current angle with few issues, but if they were moved up to align with the top surface it would give a nice flat plane to print. A good amount of the 45 …
-
Before I get started, I have an Anet A8 running Marlin 1.1.8 that I've been customizing for a bit. It is running 100% perfect with no issues at all, so I am familiar with 3D printers, but not a pro. …
-
I have five different steel sheet (prusa pei, prusa txt, buildtak pei, normal buildtak, thekking txt) and all of those needs different live z values. I have a mmu unit and this provided me the idea of…
-
Hi there,
I really like your design of this printer! My name is Ludo, I am currently doing a graduation project at my uni in the Netherlands, in which I am trying to design a 3D printer for productio…
-
I use different z values for my filaments/profile combinations. It would be nice to be able to change or confirm the set z-correction value after the filament loads so that it will be (mostly) not nec…
m-cas updated
5 years ago
-
Hi! Your guide/source materials seem to be the most complete out there... How has the machine worked out for you? I would love some feedback/insight before I get started!