-
Parent Issue: #76
The list below are files that have been released in the past by BES. These files are largely similar to those previous releases but include changes that have not been explicitly …
-
I have [a long comment](https://users.rust-lang.org/t/rust-as-a-high-level-language/4644/72) at the Rust forum (some of the inspiration came from @keean linking me to Sean Parent's [video](https://you…
-
### Describe the bug
Unable to update the stock firmware to BF 4.5.1
### To Reproduce
Enter DFU mode.
Choose board.
Load Firmware [Online]
### Expected behavior
Flash firmware.
### Support ID
…
-
Greetings to anyone that reads this message.
This Issue is where we coordinate and take bug reports for the new 8812au in-kernel driver.
An effort is underway to add support for the rtl8812au ch…
-
hi,
i saw this repository in my perusal of sources that support the GRX350/550 processors.
does this kernel work for the dual core intel interaptiv mips devices?
if so, i'm very intrigued and…
-
### Describe the bug
Hello,
I have a JHEF405 GF16 FC and a betafpv M03 VTX, and I can't seems to make smartaudio working between the two. This is somewhat problematic as this vtx don't have other me…
-
### Describe the bug
While dropping Throttle to Zero my quadcopter continues to ascend. Blackbox logs show that Motors 3 and 2 are start at 45% while 4 and 1 are at 0% while Airmode attempts to hold…
-
There are some valid commdore 1541 images that decode without any error using g64conv but have many decoding errors using greaseweazle tools.
I am attaching one:
[_scienceIII.7z.zip](https://git…
-
As with [the Radxa CM3](https://github.com/geerlingguy/raspberry-pi-pcie-devices/issues/327), I would also like to test Pine64's [SOQuartz](https://wiki.pine64.org/wiki/SOQuartz) with some CM4 boards,…
-
### Describe the bug
Doing an rsync between two spinning rust drives attached to the same hub causes a suspected controller lockup. The symptom is
```
[ 194.841355] xhci-hcd xhci-hcd.0: xHCI ho…
P33M updated
8 months ago