-
Here's a JSON for the F103ZE board that adds the SD card connector.
[STM32F103ZET6-F103ZE-Board.zip](https://github.com/STM32-base/STM32-base.github.io/files/11186833/STM32F103ZET6-F103ZE-Board.zip…
-
When you change the height it only changes the height of the graph and no the height of the card. It would be VERY VERY helpful (and its asked for a lot from what I see) to have the ability to move th…
-
**Describe the solution you'd like**
would be cool to show on the Card - or with a click. Some weather services provide a description (for example DWD). And a Time from-to. Now if we click on the…
-
**Description**
Certain elements, in this case checkboxes (checkable cards), should behave expectedly. The user should be able to check or uncheck any card. Also, user should understand which checkbox…
-
Info from Jeppesen application et jdmtool
8 MB green
jdm : G2 firmware v:20071203 isG2Orange: 0 Card:441: 8 MB AMD Series C/D (2 MB x 4)
JDA version:1.0.0.6 IID:0x100AD00 isOrangeCard: 0
jdmt…
-
### Describe the bug
After using R4S to write OpenWRT, I inserted a USB network card, but it couldn't start properly. I need to unplug the USB network card to start up properly. The chip is RTL8153, …
-
Hi, getting the following error when adding the custom repo:
Repository structure for v1.7.1 is not compliant
URL I'm using is https://github.com/FamousWolf/week-planner-card
There doesn't app…
-
### Requirements
- [X] I checked the troubleshooting section in the README to verify that I have the latest Mushroom version.
- [X] I did a search to see if there is a similar issue or if a pull requ…
-
-
steps to reproduce: < go to https://www.topcoder.com click on a user's avatar any user, then go to the dashboard, use mobile device in this case, rotate the device to landscape, then scroll down to t…