-
## Environment
- Development Kit: own, 4-layer board
- Module or chip used: ESP32-WROOM-32D (16MB)
- IDF version: ESP-IDF v4.1-dev-1086-g93a8603c5-dirty
- Compiler: xtensa-esp32-elf-gcc (c…
-
Hello.
Will the GT Power A6-10 firmware work on the GT Power A8 ?
I can I confirm this without trying to flash it ?
Help appreciated.
-
Please test out POST requests for Zendesk Ticket Creation via Postman
-
Bonjour tout le monde,
Le site commence à dater un peu, malgré une refonte visuelle d'il y a 2 ans. Les principaux grieffs de la version actuelle :
- page lourde à charger (merci les 180Ko de JS…
-
Hoping for charge rate control in HA Emporia Vue... PyEmVue seems to have this, as the Emporia API exposes it. Is there any plan to allow controlling the charge rate on the Emporia EV charger in the H…
-
Bonjour,
Bien intéressante cette extension? Je ne demandais s'il vous était possible d'ajouter Bibliothèque et Archives nationales du Québec (BAnQ) à la liste des cibles proposées ? Pour ne pas laiss…
-
when trying to stop a charge session by turning it off, the charger is automatically turned on again "by my new motion".
it looks like there is something that is not correct as it only turns off when…
-
It is often confusing when upper and lower cases are mixed in indexes or carrier names.
I would suggest to consistently use only lower cases in all component indexes and carrier names. For all end…
-
A possibility for powering the microcontroller for e.g., the color sensor:
https://www.canadarobotix.com/products/2761?srsltid=AfmBOooxDHrNvKuctEIGHWXeIHusmvp-t7ae6e-OptdjdnoMbGhULSo7
https://www.ad…
-
# PCB
- modify edges of button so when being routed on mfr. it doesnt come out round
- add fiducials for alignment
usb doesnt sit well because of lip
- ADD PIN1 MARKER TO Q1 SO8
- crystal needs to b…