-
When I set MQTT interval to 480 in cc26xx-web-demo MQTT/IBM Cloud Config page, I see the report duration is always about 200 seconds in IBM quickstart. I try to enable debug message in MQTT and find i…
-
**Is your feature request related to a problem? Please describe.**
This is a feature request. The code currently for `jtag_scan` will put the device into JTAG test logic reset (TLR) before scanning.
…
-
Hi All,
I make a board use CC1310F128RHB, this board has one LED connect to DIO3,
I modifie in contiki/platform/srf06-cc26xx/launchpad
#define BOARD_IOID_LED_1 IOID_3
I use example rpl-…
-
_Disclaimer: I am not using simplelink-platform myself, so I might well be mistaken. I noticed these during work with the cc26x0-cc13x0 platform watchdog._
----
1. It seems [watchdog_init()](htt…
-
I'd like to experiment with using the CC1310 LRM (625bps, DSSS, FEC etc) settings provided by TI with Contiki.
Unsurprisingly, a quick copy/paste of LRM settings from SmartRF Studio into `cpu/cc2…
-
Hi,
I'm using the cc1312r7 but contiki-ng doesn't support the cc1312r7.
When will the cc1312r7 be supported?
Also the core sdk is old version.
Are there any plans to update the SDK? If ri…
-
As I understood, the tsch slot operation is called as a callback function of RTIMER and is called inside its ISR.
In Simplelink CC13xx platform RF driver implementation `arch/cpu/simplelink-cc13xx-cc…
-
hello,
im building an iot project using ti launchpads, i have two launchpads i flashed on the gateway the 6lbr lite (the one connected with olimex Ethernet controller) using one of the cc1310 launchp…
-
Hello,
I am trying to use rime+TSCH on CC1350 sensortag.
1. make TARGET=srf06-cc26xx BOARD=sensortag/cc1350 at
/home/ga83jok/contiki/examples/rime-tsch/
2. I am getting following error,
```
St…
-
Have you considered replacing CC2530 in DIYRuZ Flower sensor design with a new TI CC26xx MCU like the CC2652 series or similar?
Should in theory make the battery last much longer and get better sig…
Hedda updated
2 years ago