-
Hi rgwan,
I made an Android App for the CH55x Chips to flash them via Android USB OTG.
Right now i made an update to Support V2.31 Bootloader's it is tested with the CH552G and until now the CH…
-
Hi, I want to create a bin file to upload to the ch552 but It doesn't works. Can you please give me the versions of the libraries you used for this project 😥? thx
-
你好 从立创广场一路看到这来的 很不错的3键键盘固件!
我自己的出发点是想要做一个单独的Sysreq单键键盘 开源广场上也看了很多方案 感觉各路神仙都把ch552玩出花来
我读了@DeqingSun的示例代码和你的项目 基于我自己的使用场景 想给功能键增加一个sysreq的选项 也查了相关的hid规范pdf
![image](https://github.com/yuan91071…
-
I just got a new pedal from AliExpress and the VID:PID is 5131:2019 so it does not find it!
I have tried adding it to the list of VIDS in the source code but it still does not work so any suggestio…
-
This project looks great!
I see from the pictures that there is an open source hardware logo on the board. In the following I assume the intent is that this project is an open source hardware proje…
-
Can support ST-Link V2 to download F200A
how to setup on windows ?
-
Which basically means that diodes' direction need be switched for every other column, this is great for low-count-GPIO-MCUs, e.g. the CH552, check out more about the duplex matrix here:
- In the c…
-
Hi eb1992, thanks for the great work!
I was trying to use ShiftLcd with CH552G using the [ch55xdruino](https://github.com/DeqingSun/ch55xduino) board definitions. However, I am getting this error m…
-
The problem is described below,I hope someone could solve it.
```shell
sudo ./openFPGALoader -c digilent_hs2 --freq 15000000 --index-chain 1 -m --bitstream ./top.bit
write to ram
Jtag frequency :…
-
**Summary**
I recently bought a stack of puya py32 mcu’s after reading this [article](https://jaycarlson.net/2023/02/04/the-cheapest-flash-microcontroller-you-…