-
### Description
I just flashed my XY-3 Pro. Because there wasn't a prewrote "#define" for my printer I had to get creative In config.h I used the
XY-3_V5_330_NO_TITAN_TMC_NO_ABL
I changed the fo…
-
## The devDependency [codecov](https://github.com/codecov/codecov-node) was updated from `3.1.0` to `3.2.0`.
🚨 [View failing branch](https://github.com/tymondesigns/chitu/compare/master...tymondesig…
-
My Elegoo Saturn2 printer cannot start to print any uploaded files on the 64 GB SD card when it is operational after connected to Octoprint server.
I installed OctoPi version: 0.18.0 with OctoPrin…
-
### Did you test the latest `bugfix-2.0.x` code?
Updated 14/6: Tested with bugfix, same.
### Bug Description
This is running under version 02000801 with NOZZLE_CLEAN_FEATURE enabled. I am n…
-
Hello, I am having the no printer attched issue with my printer. I have an Ender 5 plus with an SKR 3 EZ and a TFT50 V3.0.1. I will provide my configuration.h below but I have followed the manual, and…
-
Hey,
i tried to use this test on my Peopoly Phenom.
If i try to print it, it says that the resolution is not matching.
I opened the .phenom file in chitubox, went back from the export screen,
…
-
I have a Elegoo Mars 2 Pro with the latest firmware using Chitubox 1.9.1. I added headers to the motherboard and am using a Raspberry Pi 2W and connected the Gnd, TX, RX wires per the diagram. I fo…
-
@Photonsters/photon-file-editor
Hi all, I am planning on doing some development of PFE and have some thoughts which I wish to share. Please comment:
1. PFE was initially meant to be a one-stop-solu…
NardJ updated
5 years ago
-
Hello,
I think I am using your library incorrectly, as when I try to print a CTB file generated with `catibo`, it is unrecognized by the printer.
Hopefully you can spot something incorrect in my…
-
I have a very recent (jan2021) tronxy x5sa-400 (not pro).
Conventional wisdom says this is non titan and has a4988 stepper drivers, however my machine seems to have a Titan extruder and has the TMC2…