-
Is it possible to capture the error states of the pump ?
Eg this morning i turned my heat pump on, and the returned state was on `pool/power` was 1, however it didnt turn on due to an E03 code, whi…
-
Once in a while I need to reauthenticate the integration, which causes my automation to stop. Could you make the integration as such that it tries to reauthenticate itself?
-
### The problem
Once in a while, HA crashes since I have enabled this integration.
Looking at the logs (after recovery, which is abnormally long), I can see those lines, which might be helpful to in…
-
I was considering setting up a system to control my above ground 14k gal pool with a ControlOMatic MegaChlor-CD which is a relatively simple device you just drop in your pool (provide it with 12V set …
cb88 updated
5 months ago
-
Hello
I am using a [Sequent Home Automation v4](https://sequentmicrosystems.com/products/raspberry-pi-home-automation-card) card to do some simple pool automation (RS485 for the chlorinator, firema…
-
### nodejs-poolController Version/commit
8.0.0 a80df29
### nodejs-poolController-dashPanel Version/commit
8.0.0 cb05840
### relayEquipmentManager Version/commit
N/A
### Node Version
v19.8.1
##…
-
Hey Richard,
Great project you have started here. I'm also looking to do something similar to my Intex spa. Final product would ideally be able to control the spa remotely maybe using ifttt or some…
-
### nodejs-poolController Version/commit
7.7.0
### nodejs-poolController-dashPanel Version/commit
7.7.0
### relayEquipmentManager Version/commit
N/A
### Node Version
_No response_
### Platform…
-
### nodejs-poolController Version/commit
8.0.1/6d1ddbe
### nodejs-poolController-dashPanel Version/commit
8.0.0/e1e5190
### relayEquipmentManager Version/commit
_No response_
### Node Version
v…
-
So here's a fun story:
Earlier this year I upgraded my Jandy RS16 from "Q" to "T.2". I wanted to control some new IntelliBrite lights so had to do this upgrade (they're not supported by the older C…