-
Hi there, first of all let me acknowledge the great work you did in this repo, it really looks you are an experienced programmer and importantly you are kind towards people looking for information and…
-
Create an STM32 dev board that will allow us to test it and its subcircuits, by just plugging it into the Unified Board. It should be of a similar form factor as the Teensy, and have GPIO and communic…
-
- To detect correct communication with the MAX31855, a pull-up resistor must be added between the MISO pin and VCC.
Without a pull-up, random noise may appear that might look like real data.
…
-
The arduino I've been trying to get to work is `circuitplay32u4cat`. To test like I have, I simply changed the board in the example target `blink_example` to `circuitplay32u4cat`. It fails for any exa…
-
Good afternoon!
Please add an electrical diagram for EBB SB2209_USB
Thanks!
-
Check out this
http://www.make-digital.com/make/vol36?sub_id=UY98xFbKN8JO
-
If I increase the default Power Delivery (PD) voltage from the configuration file beyond the specified 9000 mV, my microcontroller becomes damaged. The HT7533 is overheating and that is it, my mcu is …
-
Hey guys, lately on my SKR V1.1 Pro board, I've been getting this strange `coil short circuit` error with my TMC2208 drivers (which are on my Extruder and Z axis). I've gone and checked the wiring and…
-
### Platform
ESP8266
### Assembly
I did the assembly by myself
### nRF24L01+ Module
_No response_
### Antenna
circuit board
### Power Stabilization
Elko (~100uF)
### Connection picture
- [ …
-