-
In Home Assistance the climate control is not working anymore.
It always shows off state (see screenshot below). It should say "heating" because cooling is on.
![2024-08-11_13h09_05](https://git…
-
-
Add some way to flag the driver that the consumer (HA) doesn't support a certain feature/CC.
Usecase is for example the Thermostat Setback feature that we do not support in HA while its being tested …
-
**New bug checklist**
- [✅ ] I updated the iOS openHAB app to the latest [TestFlight](https://testflight.apple.com/join/563WBakc) version.
- [✅ ] I read the [Contribution Guidelines](https://githu…
-
## Version of the custom_component
6.2.9 and 6.2.8
Home Assistant 2024.8.1 on HAOS
## Configuration
My VTherm attributes are the following:
```yaml
hvac_modes:
- "off"
- …
-
Got a recurrent warning message in thé logs :
_Temporarily skipping the self-regulation algorithm while the configured sensor for room temperature is unavailable_
I've set a thermostat over thermos…
-
### The problem
With Web Interface v3, sliders can be long-pressed to edit their value in a text field. However, if the currently-set value is out of bounds for the slider (in my case, it's larger …
-
When tap water heating is done by Anti Legionella mode, then there is no visual indication about it on the climate control. Perhaps add Anti Legionella mode into it if possible?
![image](https://gi…
-
I've had a couple of power outages lately in my area which completely turns off and resets the spa settings. I've been able to set up an automation using this integration to turn it back on but there …
-
Hi,
IAs its winter down in this hemi-sphere, I have been focusing on humidity and getting the climate controls set up correctly.
I have noticed a patteren, the EP1 device I have seemn to be measurin…