-
# Describe the problem
The values for the gas sensor and air quality are not displayed on the Nicla Sense ME dashboard and are always zero.
![image](https://user-images.githubusercontent.com/756…
-
I am using DAPLink on ATSAM3U2C HIC configured with DAPv2 in a CI setup with PyOCD as the host interface and have observed sticky failures of the DAPLink firmware that manifest as USB timeouts, e.g.:
…
-
CMSIS [DAP_Info](https://arm-software.github.io/CMSIS_5/DAP/html/group__DAP__Info.html) (v2.1) fields (`Target Board Vendor` and `Target Board Name`) can currently be used to identify a board and map …
-
My probe firmware does not provide a serial descriptor string, and pyOCD 0.28.x worked fine. 0.29.0 seems to require it now:
```
0000542:CRITICAL:__main__:uncaught exception: 'NoneType' object is n…
-
Hi there! I'm trying to upload to rpi pico with a raspberry debugprobe (this thing https://www.raspberrypi.com/documentation/microcontrollers/debug-probe.html, firmware 2.0.1).
Everything is connecte…
-
Hi,
I don't know if this is the right place to ask, but any help will be appriciated.
I have a GD32350G-START development board that PlatformIO does not seem to recognize as a device. I can sti…
-
### Problem
The Visual Studio Code section (Section 7.3) of the Pi Pico Getting Started guide suggests that you copy a [file](https://github.com/raspberrypi/pico-examples/blob/master/ide/vscode/lau…
-
**Describe the bug**
Any `probe-rs` calls towards the MCU fail. SWD seems to end in an endless recursion.
**To Reproduce**
Steps to reproduce the behavior:
1. Connect jlink via SWD to lpc55s69…
-
I edited the blink example to write some semihosting messages, but a `target halted due to debug-request...` message is displayed with each semihosting command, making the output unreadable:
```
i…
-
I am trying to use a Pico with yapicoprobe to upload and debig another Pico.
Using VS Code, Platformio, with platform = raspberrypi and framework = arduino.
`debug_tool = cmsis-dap
upload_protocol …