-
I followed the instructions of #21, but I encountered the problem that setting the TC address to 0xffffffffffffffff results in the TC link key being reset to 0x5a6967426565416c6c69616e63653039.
-
The digital signature of file conbee_ii.cat has expired on 27.02.2020.
Workaround: set Windows time before 27.02.2020 and install driver.
-
Hi all,
I switched for Conbee I to Conbee II stick.
How to remove old Conbee from Deconz and Phoscon?
thx
![grafik](https://user-images.githubusercontent.com/39955685/78794824-81625200-79b4-…
-
Now that the firmware was fixed so that the sensor can potentially work with a Conbee/DeConz setup: how would I flash it to the device? Seems not to support OTAUs…
-
### Describe the issue you are experiencing
I've been having an issue for a while that sometimes when Home Assistant Core (re)starts (for instance after installing an Home Assistant OS update or an H…
-
Hi
The conbee device serial protocol sometime send an unsolicited command 0x19 that is not documented in
https://deconz.dresden-elektronik.de/raspbian/deCONZ-Serial-Protocol-en_1.21.pdf
An…
-
![image](https://user-images.githubusercontent.com/52735978/94218600-243d6700-ff28-11ea-9c3c-b43a986c13ab.png)
Has anyone had an opportunity to test the firmware with ZHA as yet?
Interested to h…
-
Bonjour,
Qu'avez-vous besoin pour effectuer l'intégration dans HA ?
Je possède la solution, avec une clé ConBee II , je vois bien le ZLinky_TIC dans la carte réseau des appareils zigbee, mais deco…
-
Hi,
First of all it is not an issue it should be a suggestion or upgrade request.
Deflux works fine for me, thanks for your hard work. Before the Conbee stick I used zigbee2mqtt and there the batt…
-
### The problem
Hello,
After upgrading to 12.4 I started noticing problems with automations on Aqara switches (Zigbee devices). Automations unable to complete and hanging. Looks like devices get di…