-
topo
```
name: test
mgmt:
external-access: true
ipv4_subnet: 10.4.123.0/24
topology:
kinds:
vr-sros:
image: registry.srlinux.dev/pub/vr-sros:22.10.R1
license: /vsim_l…
hellt updated
3 months ago
-
To allow for rich configuration experience we have to make sure that startup-config files provided in the topology get templated by containerlab using the vars file we support for "templated topologie…
-
When emulating network topologies with varying paths, it could be useful to have clab configure variable delays/jitter/packetloss/etc.
```
br-clab:
kind: bridge
latency: 5-10ms
…
-
Hello,
I am trying to use network-mode: none with VM-based node, but node does not start:
```
name: vsrx-cluster
topology:
nodes:
node0:
kind: juniper_vsrx
image: vrnetlab…
-
To allow for clab nodes to be reachable from outside of the containerlab host a multiple techniques can be used.
Some of them are documented in [clab docs](https://containerlab.srlinux.dev/manual/m…
hellt updated
10 months ago
-
Hi, followed your tutorials off the Containerlab site for 'sonic-vs'; got the image imported thru Docker, however after 'deploying' it is stuck in a 'created' state, but not 'running'. There were 'dep…
-
It has been reported that vr-based nodes have datapath connectivity issue when using the macvlan mode.
Considering the following topology:
```yaml
name: mvlantest
topology:
kinds:
…
hellt updated
8 months ago
-
I'm getting some strange results (or no results) when attempting to use a gnmic relay with nats.
Are there limitation of event processing that can be done when using nats output/input?
Are there lim…
-
I have installed and run this on 5 different machines, all running ubuntu 24.04 and I have run into the same issue on each:
(I am showing a single container, but this occurs on all 6 of the srl co…
-
to add support for most popular network oses