-
I'm trying to test the capability of controlling hardware (e.g. LEDs) on the board using Google Voice Assistant. When I give the commands "Turn on" and "Turn off" to control the LED using the NXP i.MX…
-
Being very new to C++ development I was looking for a clean way to execute arbitrary code in the main sketch - triggered by the NoteButtonMatrix. My first use case was controlling WS2812B LEDs, which …
-
https://www.jeffgeerling.com/blogs/jeff-geerling/raspberry-pi-zero-conserve-energy
-
Hi,
I've been searching for a tool to control the lightbar on my laptop (Tongfang GK7CP7S) and this tool does the job.
I've tested the other features within this module too, findings below.
#…
-
### Binary
- `acu` - Dubbed the axial control unit. Will make use of the other firmware libraries both defined in this project and elsewhere.
### Libraries
- `esc` - The electronic speed controller li…
-
# Proof Of Concept
## Metadata
| key | value |
| ----| ----- |
| name | mono-sn74hc595n-manager |
## Description
Talking about countdowns, one of the goals we want is that we want to not…
-
# Proof Of Concept
## Metadata
| key | value |
| ----| ----- |
| name | bi-sn74hc595n-manager |
## Description
Talking about countdowns, one of the goals we want is that we want to not d…
-
Control filter cutoff, LFO...
Arduin0/MCU?
Connected on i2c? USB?
Pot/resistive film/bend resistor
Additional buttons?
LEDs?
-
PRU firmware:
https://github.com/mingzhangqun/cloud9-examples/tree/bbai64-cape
DTS:
https://github.com/mingzhangqun/BeagleBoard-DeviceTrees/tree/v5.10.x-ti-arm64-dev
robotic_demo:
https://github.…
-
Currently Aurora controls by LED strips attached to my Corsair Lighting Node by using the color settings applied to my Logitech G502 Mouse. However, since my LEDs are individually addressable, I wante…