-
### Is your feature request related to a problem? Please describe.
The current Bed Mesh Validation pattern feature warns that it is only compatible with printers which can tolerate 6mm of retraction …
-
The body and lid STLs are 236mm on the longest axis. which doesn't fit even on an Ender 3 Pro 235x235mm print bed, and shouldn't fit on the recommended Prusa mk3s+ 210x210mm bed either. Unless printed…
-
Attempting to build the SDK, I now get:
```
Scheduling the initialization of the Ceylon dependencies for project ceylon-sdk after the Java Tooling has been initialized
Java Model Exception: Java Mode…
-
Line 27 of CR6.cfg sets the extruder temperature to 0 as part of [gcode_macro TARE_PROBE].
In line 126 of printer.Creality-4.5.3.cfg you call activate_gcode: TARE_PROBE.
The effect of this is th…
-
in this case,
- one path is 3 hops longer than the other
- last few hops before destination does not respond
```
2. et-1-0-23-921.cr6-ams1.ip4.gtt.net (77.67.93.233) …
-
just a quick note...
i recently got a new CR-6 Max wit the era board.
i have a pi running with a touch screen and the basic klipper / moonraker / mainsail / klipperscreen loaded and seems to wor…
-
Hi
when pressing auto-level, the screen doesn't show the 16 places for the auto-level to touch + text indicate that the temp of the nozzle should be 0°C.
Pressing the back button and entering agai…
-
Firstly, thanks for maintaining such a useful add-on.
I've tried following the "info" instructions on how to create a REST sensor for the inbox. I get this error:
`Invalid config for 'rest' from i…
-
### Is your feature request related to a problem? Please describe.
I have a direct drive extruder and I need to reduce the X-Axis down to 375mm and Y-Axis down to 365mm. The ability to change these v…
-
These older D-series projectors from Christie don't respond to the protocol in the Christie module, and don't respond to generic TCP requests. An actual Telnet session is required, using port 10000.
…