-
I think that line 8 for the example program "oledDisplayGPSInfo" for HTCC-AB02S CubeCell Lora-GPS board should be updated.
Currently it is:
```
SSD1306Wire display(0x3c, 500000, I2C_NUM_0, GEO…
-
Links to check out:
https://www.rfwireless-world.com/Terminology/LoRa-modulation-vs-CSS-modulation.html
https://www.rfwireless-world.com/Tutorials/LoRa-tutorial.html
https://skills.microchip.co…
-
It'd be great if the various support libraries (LoRaWAN) could be separated out from the ASR650x core; I'm wanting to use the CubeCell for Helium LongFi, which replaces the entire LoRa stack, though r…
-
Thanks for sharing this code here! It worked GREAT!
I'm kind of new at coding and Meshtastic so I'm wondering about a couple things. While connected to PlatformIO I can see it receiving packets and r…
-
I am measuring temperatures in my beehives.
Setup: cubecell-AB01, EU868, ABP, ADR=off, UNCONFIRMED uplinks, measurement every 15 minutes, deepsleep in between. My own Things Indoor gateway handles …
-
Board: CubeCell GPS-6502
Version: 1.4.0
Example: OnBoardGPS > PeriodicLowPowerMode
The sketch gets stuck on "GPS Searching..." after a few iterations. More precisely it gets stuck in `GPS.begin()…
-
I got the following error:
`exec: "C:\\Users\\.....": file does not exist
Error compiling for board CubeCell-Board.`
I tracked down this error to my Windows username, which contains a space.
I …
-
I had about 95% packet loss with specifically Bobcat Helium Hotspots when using my htcc-ab02s with the last libs (1.1.0, 1.2.0, 1.3.0)
I get 0% packet loss when I switch back to Version 1.0.0
Wh…
-
A question:
How can I get the LORA TX/RX data that normally flows to the COM-port on the built-in display?
-
I have massive Problems making it work to have a clear interrupt signal on the cubecell dev board (HTCC-AB01).
**Problem: Interrupt is firing randomly**
I tried to:
- Use internal pullup resp…