-
The hex file is uploaded and the 8051 comes out of reset, but the FX2 doesn't re-enumerate.
Fix: change `usb_init(/*disconnect=*/false);` to ` usb_init(/*disconnect=*/true);` in this line:
https:…
-
```
rauc install http://10.0.0.10/bundles/update.raucb
installing
0% Installing
0% Determining slot states
20% Determining slot states done.
20% Checking bundle
20% Verifying signature
…
-
### Bug report
**What is the problem?**
It was noticed that the AC mesh is no longer booting when it is upgraded to gluon 2022.1.2. This was also noticed on following other devices (but debuggin…
ecsv updated
9 months ago
-
Hi,
I bought the MyGica T230A tuner. I didn't know there would be a problem with the letter A.
When I connected it to rpi with libreelec, dmesg showed something like this:
```
[ 262.006051…
-
Tested with commit https://github.com/GideonZ/1541ultimate/commit/a4e063ef4da8d2d1c1f52ab941b2b82d04fc4786
I did not try to bisect which commit causes the problem but I suspect it might be https://gi…
-
There is an example device for hidraw from umockdev project. Maybe we can integrate it for CI under Linux.
https://github.com/martinpitt/umockdev/tree/main/devices/hidraw
-
Hello @gsuberland
Unfortunately, the description isn't detailed enough.
I found that adding a section to 8051.ldefs file is also needed, I tried my best but still don't know if that's right.
`…
-
The DE10 nano has a built in USB Blaster, VID:PID `09fb:6810`.
Running `openfpgaloader -c usb-blaster lut.rbf`
fails with:
```
write to ram
unable to open ftdi device: -3 (device not found)…
-
I'm working on a Java app that uses LibUsb 1.0.22 through Usb4Java 1.3.0. I need to get data through bulk transfers from a device that implements the WinUSB spec. Since the data is streamed from the d…
-
Reported by @hgrodriguez on gitter:
When calling `Mem_Read` with `Memory_Size_16b`, the two address bytes are written in separate transactions, rather than using repeated start.
![Logic analyzer…