-
According to specification all DAPLink devices should have "CMSIS-DAP" in "iProduct".
Please, fix this in firmware.
https://github.com/probe-rs/probe-rs/pull/1004
-
Type: Bug Report
**Describe the bug**
- OS and Version: Windows 10
- VS Code Version: 1.77.3
- Serial Monitor Extension Version: v0.9.230429001
- Target embedded device: FRDM-K22F, FRDM…
-
When drag and dropping a nRF52 binary the first bytes are validated in to be valid.
https://github.com/ARMmbed/DAPLink/blob/master/source/daplink/validation.c#L55
The problem is if they are not va…
-
台式机，win11，daplink插在usb3.0口上，驱动感叹号，keil无法识别。手动安装驱动后感叹号没有了，但是keil一样无法识别。
换到usb2.0口上keil就能识别了。
-
https://lgl88911.gitee.io/2018/07/18/DAPLink-VSCode%E8%B0%83%E8%AF%95nrf52-moderate/
-
板载的daplink能不能用来给其它开发板当烧写器调试器用
-
Starting with release 0254, DAPLink builds "no target" firmware binaries for each HIC, meant for either standalone debug probes or cases where you don't need MSD flash programming. These builds need t…
-
Hi, I bought a keywish new:bit (but on PCB shows BBS micro:bit), V1.6. one day it cannot start.
I connect the board on PC and swith in maintenance mode. here are the contenu of the original Detail.…
-
Hi,
I have designed a custom board using NXP MK64FX512 MCU and included the OpenSDA circuit from the FRDM-K64F board.
For OpenSDA, I have flashed the latest FRDM-K64F DAPlink bootloader and target…
-
Hello,
I tried reflashing my MCU-LINK with both the bootloader and application from 0257. There is no MSD and the jumper location to get it to boot into bootloader mode has changed from pin 3 to pin…