-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
Y
I confirm that I …
-
Hi @ksharindam .
See https://sourceforge.net/projects/qimageblitz/
```sh
cat qimageblitz.h
```
```cpp
class QIMAGEBLITZ_EXPORT Blitz
{
public:
enum GradientType {VerticalGradient=0, H…
-
### Preliminary Docs
I confirm that I have read the [CONTRIBUTING](https://github.com/ccrisan/motioneyeos/blob/master/.github/CONTRIBUTING.md) guide before opening this issue.
I confirm that I h…
-
The related workflows all end with CER / WER 1.0, so no text is recognized by Calamari.
A manual run for a single GT terminates in less than 1 second without error message, but also without a usabl…
-
The test `org.contentmine.cproject.files.CProjectTest.testPicocliInjectparentOK()`
runs `AMI` over a `CProject` with the command `pdfbox` and completes. (It's largely a no-op as the data are already …
-
I have been using MotionEyeOS with the Waveshare cameras, and very happy with it. I would like to add a couple outdoor cameras to my setup. In my searching "IP Cameras" here, I have read a response …
-
I've made good progress on the foundation. I'm adding some notes about the design. It's all more more locked down at this point as it definitely takes after **Dig Dug** primarily (not breakout).
Th…
-
Good morning i have 2 TAPO C310 install on motioned in Home assistant but when i set "Show frame changes" on motioneye on the right corner of cameras appeares only - and don't work the motion trigger.…
-
Hello,
i have the I51DM security camera (C500) from Annke. I checked the netcam_url in vlc and found
rtsp://user:password@192.168.0.6:554/Streaming/Channels/101
rtsp://user:password@192.168.0.6:5…
-
in the section of code:
```
temp1 = (deltaImgNormal.*deltaImgNormal)*0.5 - delta2ImgNormal.*delta2ImgNormal/16;
temp2 = 1+0.25*delta2ImgNormal;
temp3 = temp2.*temp2;
q = sqrt(temp…