-
This is meant as a top level issue for tracking the TFM (trusted firmware-m) use case for system devicetree.
galak updated
3 years ago
-
**Is your enhancement proposal related to a problem? Please describe.**
Zephyr's current devicetree infrastructure does not support devicetree nodes having circular references. A few examples of this…
-
In NixOS 21.05, the ``hardware.deviceTree.base`` option can no longer be used. After trying to do some research, I figured out that the lines that I was using successfully:
```
hardware.deviceTre…
-
To easily use the dtbs provided with kernel packages allow specifying a devicetree name in mkosi.
It can be passed as parameter to ukify. The dtb is typically installed by the kernel package.
manut updated
6 months ago
-
**Is your feature request related to a problem? Please describe.**
Although recently sd-boot gets the ability to load dtb, it still lacks the ability to load devicetree-overlay.
This means to mo…
-
**unable to configure PWM on teensy 4.1**
i am trying the "samples/basic/servo_motor" example for teensy41 board, below have attached the overlay for teensy41 but when i build the same i get error.…
-
log:
drivers/soc/Kconfig:32: can't open file "drivers/soc/oplus/multimedia/Kconfig"
make[3]: *** [/home/runner/work/KernelSU_Action-pineapple/KernelSU_Action-pineapple/kernel_workspace/kernel_platfo…
ghost updated
3 weeks ago
-
### Describe the bug
Changes to `hardware.deviceTree.*` are not applied on NixOS where the device seems to defaults to the bootloader-provided one instead.
This behavior seems to be unique to Ni…
-
**Bug Description**
When using the `adc_raw_to_millivolts_dt` function at line ~804~ 906 of the `include/zephyr/drivers/adc.h` file, the oversampling described in the devicetree is not applied. Thi…
-
Details of the effort so far are on the wiki
This is linked to
* #28