-
Hi guys!
When compiling for a digispark, I get a lot of warning noise. I do not know how important this is but it makes me at least nervous every time I compile my code :-)
It boils down to
- …
-
Instead of the teensy, I'm using the attiny85 Digispark but it doesn't work. The error says:
Arduino: 1.8.8 (Windows Store 1.8.19.0) (Windows 10), Board: "Digispark (Default - 16.5mhz)"
C:\Prog…
-
I downloaded the firmware for the Digispark variant and it works fine, at least on initial testing - for example I can plug the Digispark into my Linux laptop, connect to an MCP23017 and ensure it has…
-
Hi,
I am currently using for the BIOS of multiple models/manufacturers, but the HP T730 Thin client gives a "keyboard error" and does not receive the input from the Digispark. (Checked with multipl…
-
**Error:**
```
core\core.a(wiring.c.o): In function `__vector_4':
C:\Users\Andrii\Documents\ArduinoData\packages\digistump\hardware\avr\1.6.7\cores\tiny/wiring.c:93: multiple definition of `__vecto…
-
```
gem install artoo-digispark
Building native extensions. This could take a while...
ERROR: Error installing artoo-digispark:
ERROR: Failed to build gem native extension.
"/usr/local/opt/…
anlek updated
10 years ago
-
I have played through a few attack scenarios and am absolutely delighted with the USBvalve.
However, USBvalve did not recognize a Rubber Ducky based on an ATTiny85 in the form of a Digispark Rev.3.
…
-
Digispark looks good:
http://digistump.com/products/1
-
I am using a Windows10 pc and trying to program a Digispark Attiny85 using the Arduino 1.8.5 IDE(with FastLED version 3.3.3).
In my project, I need to use an IMU(gy521 using I2C) and 16 LED NeoPixel …
-
DigiIrDump sketch results in USB errors (unknown usb device - device descriptor request failed). Other sketches using USB do not do this, for example "DigiScope.ino". How this error could be resolve? …