-
I would like to use this module to interface Home Assistant with a DMX smoke machine. My plan is to use ESPHome PIR motion sensors to trigger the smoke machine for X seconds. I also would like to ha…
-
Schemas currently provide a good definition of the payload to and from a responder but little context about a parameter. In their current state a controller can only assume certain characteristics of …
-
**Describe the problem you have/What new integration you would like**
I have some max485 that I use to create dmx device for my light dmx is cool because its a bus system and require only 1 esp t…
-
I'm trying to figure out how to move this into node-red and I need to figure out how I can close the serial port when node-red reloads. I'm down to, in the driver (this case is enttec-open-usb-dmx):
…
-
So I'm using the RDMSerialRecv example (Link: https://github.com/mathertel/DmxSerial2/tree/master/examples/RDMSerialRecv) and it's not working. I am using the Chamsys Magicq software connected to a DM…
-
i dont know if you can add Camra zoom through the Sofware
I got the idea after watching this [Video](https://www.youtube.com/watch?v=E_TrhW-zGi8))[ this may help](https://github.com/xLightsSequence…
-
### What happened?
Sometimes WLED becomes unresponsive (API and web UI don't work) and plays effects with lags after enabling streaming effects from LedFX via DDP. If I stop LedFx streaming, the is…
DeKaN updated
16 hours ago
-
I have an old BlinkyTile sculpture that I don't use very often because it's not integrated into my smart home setup / remotely controllable. I was wondering if it would be possible to wire up the tile…
-
Hi, thank you very much for creating this package!
I was wondering if you are planning to add functionality to connect Arcus stepper motors since the current code only seems to include 2-axis and 4…
-
Not to say it *ever* worked, so this is not new breakage.
I finally got some dmx hardware, specifically, the hardware mentioned here, because it is cheap:
https://artemis.forumchitchat.com/post/…