-
### CircuitPython version
```python
Adafruit CircuitPython 8.2.3 on 2023-08-11; FeatherS2 with ESP32S2
Board ID:unexpectedmaker_feathers2
```
### Code/REPL
```python
import adafruit_dotstar
```
…
-
The Pi Pico has 2 physical cores, but only one core is usable in CircuitPython. Micropython has limited multicore functionality when used with the pico, allowing the user to start a separate task whil…
-
# High Bit Depth Gamma Correction Algorithm for APA102/Dotstar LEDs
This algorithm gamma corrects into 16 bit then bit shifts against the global brightness then converts back into 8,8,8,5 space.
…
-
I'm unfamilar with the way addLed uses can I convert a selectable char* to a class name?
sorry about the formatting.
This works but is repetitive:
`if( strncmp ( sled.getValue(), "NEOPIXEL" …
-
Summary: I compiled and run the strandtest script on my ESP8266 board with the number of pixels changed from the default 60 to 300 and that caused the chip to do a soft reset every couple of seconds.
…
-
Currently I am using a static config in compile time in my project.
(usage of Config::)
I would like to configurate my connected LEDs dynamicly at runtime.
But when I am using the parameters of my me…
-
Would like to request support for this if possible.
```
# Macros for setting the status leds on the Voron StealthBurner toolhead (or for any neopixel-type leds).
#
# You will need to configure …
-
Not implemented yet, but will be soon (when I get my hands on another camera and a Pico to use with generic four-pin LEDs).
However, there are some things to note:
- Currently we use Adafruit's D…
-
When I upload TM1637 example sketches to the ESP32 Devkit V1, the program crashes with a watchdog reset. I already found the cause, and the fix. The problem is, the fix requires a big change to severa…
-
[Dotstar LED strips](https://shop.pimoroni.com/products/flexible-rgb-led-strip-dotstar-apa102-sk9822-compatible) are compatible with APA102, and I found I was able to use this library to drive them, b…