-
I'm a beginner of rust embedded development of esp32. I want to drive DS1302 with Half3Wire-Duplex Mode, but code below didn't work.
```rust
use esp_idf_hal::{
gpio::Gpio2,
peripherals::Pe…
-
## Environment
- Audio development kit: [none]
- Audio kit version (for ESP32-LyraT/ESP32-LyraT-Mini/ESP32-S3-Korvo-2): [N/A]
- [Required] Module or chip used: [ESP32-S3-WROOM-1]
- [Requir…
-
Hello
I'm using Ds1302 library on an attiny85. It works ok.
I need to do some calculations with dates. I look for "timstamp" but no luck.
Is it possible to get a timestamp for a given date or…
-
I am interested in adding device drivers for I2C-based devices, such as G-sensors (accelerometers), RTCs, and the BH1750 light sensor, within the NuttX operating system. I have noticed existing driver…
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …
-
```
This is a space for Fritzing users to upload and share their self-created
parts with others.
Add your part by adding a comment to this issue and attach your part as a
.fzpz file.
(You can get …
-
When trying build for the pi, the build fails with this output:
`make ARCH=arm CROSS_COMPILE= -C /lib/modules/3.13.0-24-generic/build M=/home`
`/path/to/rtl8812au modules`
`make[1]: Entering direc…
-
When running sudo ./setup.sh I'm getting the following error - fatal error: azure_c_shared_utility/xlogging.h: No such file or directory
I'm guessing the azure_c_shared_utility should be part of the …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Hello,
I got this error, compiling a a previously correct program incl. Your library DS1302 v 1.0.4 in Arduino IDE 2.0.3:
_**C:\Users\Me\AppData\Local\Temp\ccOl8sUg.ltrans0.ltrans.o: In function…