-
The BME280 is not a great temperature sensor. Support an additional DS18B20 sensor and prefer the temp readings it provides.
-
Hi,
I'm a novice programmer looking for a tinygo ds18b20 driver to use with Raspberry Pi Pico W. Willing to test. Have used various ds18b20 golang drivers on Raspberry Pi Nano, etc. Thanks in a…
-
Liens utiles:
- https://stackoverflow.com/questions/72771186/read-multiple-ds18b20-temperature-sensors-faster-using-raspberry-pi
- https://lastminuteengineers.com/multiple-ds18b20-arduino-tutorial/
…
-
Compile fails for ESP8266 on Arduino 1.6.9 , ESP8266 boards 2.3.0.
> Arduino: 1.6.9 (Windows 10), TD: 1.29, Board: "NodeMCU 1.0 (ESP-12E Module), 80 MHz, 115200, 4M (3M SPIFFS)"
>
> C:\Users\tis…
-
I loaded the latest firmware to a CC2350+2195 but cannot get the temperature sensor to work. I tried router and enddevice firmware and connected a ds18b20 sensor to P0_7.
Zigbee2MQTT:info 2021-05-…
-
Not a major issue but...
1. add the 1-wire interface to REM
2. go to the 1-wire device list
3. name each DS18B20 device and save it
4. save settings on main panel
5. note that probe names are l…
-
I've reflashed a few times and everything else functions perfectly but I can't seem to connect to my network after the first time setup and it doesn't create the backup network.
I also tried lookin…
-
1. Allow sensor polling instead of delay time based wait for conversion to complete.
2. Allow relevant commands to be called without MATCH_ROM i.e. in SEARCH_ROM sequence.
3. Add support for parasi…
-
Is if possible to use other Sensors?
-
[pimatic-ds18b20](https://github.com/pimatic/pimatic-ds18b20) is ready for testing. I had no time to test it with real hardware yet, so I'm happy about feedback.
I decided to **not** use the owfs mod…