-
So as I navigate getting into Ham, I have a bajillion questions that don't seem to get answered well.
We got things like ARRL's "Ham radio etiquette guide" which is semi good, but also gives a lot …
-
**Reported by dgriffi on 2012-05-06 04:35 UTC**
Unlike the official Echolink client, with Qtel, clicking on the column header of "location/description", "status", etc does not re-sort the list accordi…
-
We are running a linked repeater system in the northwest of Germany. If there is interference comming in from one of the connected repeaters, sending a # does not disconnect immediately, but waits fo…
-
I have set svxlink to use pin 10 as output for PTT and pin 7 as COR, the PTT function is operating normally and will trigger normally with EchoLink connections and normal timed operations however I c…
-
For interconnection of the repeaters and connection to internet we use an intermediate network
that has limited bandwidth. When overloaded it drops packets. It appears that this sometimes
resulted i…
-
No matter what I set in ModuleEchoLink.conf I cannot get description to display properly. I noticed that if I am connected from my iPhone and restart the SvxLink server the description appear for a co…
-
Particularly as this is a large project, we should try to capture as much functionality of the app_rpt ecosystem as possible in tests - both unit tests, but probably mostly test suite tests.
These …
-
Hey guys,
any chance of getting a module to interface with mumble?
Mumble is a Low Bandwidth VOIP system which allows you to have rooms within the server and ability to lock it down so only aut…
-
When an audio stream is incomming from one station, a connect to another station is only executed when the audio stream from the first station is interrupted due to a dropout or if it ends.
The re…
-
The connection to the directory server over a proxy server can be closed in two ways. Either the directory server has no more data to send and closes the TCP connection. The proxy server then sends a …