-
### Describe the bug
One of the latest evcc I observed that the values of the "charge Level" is wrongly reported.
This leads to a wrong value of charged capacity.
I am charging a Skoda Octavia ju…
-
### Describe the bug
While charing with 1 phase, it's reporting incorrect charging speed. It looks like when I was charging Kia EV9 with 3 phase charging power was correct. But not with PHEV car.
…
-
### Describe the bug
When trying to start charging with the PMCC while using 1 phase evcc crashes. This is most likely the reason cause the charge current for EEBus expects 3 phase current array. The…
-
### Describe the bug
After upgrading from version 0.130.0 to version 0.130.2. Evcc shows 3 phase charging while charging 1 phase. Also the reported power seems to be real power * 3.
### Steps to …
-
### Describe the bug
Als erstes ein riesiges Lob an alle die EVCC möglich gemacht haben.
Da meine Pulsar in Verbindung mit EVCC beim Taycan nicht ganz so smooth läuft wie mein ID dachte ich mir …
-
Hey, I got the eebus connection working locally on my mac for the evvc.
When I try the same config inside of my hass then I do not get the log:
[eebus ] DEBUG 2024/07/15 13:35:20 incoming connec…
-
### Describe the bug
During charging charge currents are received only from time to time. In between error message "charge currents: not available" is logged.
Full logs are stored as attachment beca…
-
I'm creating this issue to start brainstorming ideas which may or may not grow into something. For starters, I will share some unstructured thoughts, which could grow into something structured and pot…
jlaur updated
7 months ago
-
### Describe the bug
I am using evcc with one wallbox (Elli Charger Pro), two vehicles in “mode: now” (fast mode) and without PV: My current use case is controlling the target SOC.
evcc should the…
-
### Describe the bug
Das laden stoppt, startet aber wieder für ca. 3 Minuten, stoppt kurz, startet wieder und immer so weiter.
Auto (Cupra Formentor PluginHybrid)
Das Verhalten tritt auf soba…