-
Hi,
I want to build my own USBKVM. The BOM isn't clear on how big the 24Cxx EEPROM is supposed to be as the metadata in the Horizon project just says "24Cxx SOIC8" and not an exact part number. The…
-
**Describe the bug**
unplugging an hexpansion with an eeprom during a read or write operation crashes the badge:
Hexpansion files: ['app.py']
Traceback (most recent call last):
File "main.py",…
-
### What happened?
The embedded Raspberry Pi Imager doesn't read IMAGER_REPO_URL in bootloader EEPROM.
Imager look for [rmem0](https://github.com/raspberrypi/rpi-imager/blob/686ad14308639b0589a297…
-
Hello .
Do you have a code to use EEprom 24c08 with padauk?
-
Dear @paulino ,
during testing I found that there are occasional problems connecting to the broker.
I am sending you a piece of the program based on your examples and a console listing.
There is a …
-
We've had several wrong reads using picoprog (+ osfc.io PCB enclosure).
This happened on reading several T540p chips.
I think it's Macronix, will send the exact IC specificer(s) tomorrow when I h…
-
The CATS HAT requires an ID EEPROM that identifies some fun stuff like vendor info and GPIO mappings.
Please see the following:
* [HATS General Spec](https://github.com/raspberrypi/hats)
* [ID EEPROM…
-
I'm trying to reset all the values stored in the eeprom from Homekit but homekit_storage_reset(); I'm trowing a exception. This code is using (https://github.com/Mixiaoxiao/Arduino-HomeKit-ESP8266) a…
-
### Is your feature request related to a problem? Please describe.
With a large enough mesh and a small enough flash/EEPROM capacity, M500 and M501 stop working as there is not enough capacity. Th…
-
Sometimes after printing or after print cancel I'm getting "EEPROM datasize error" in Octoprint logs. The bed level is resetting and it's required to perform bed calibration again. It's quite annoying…