-
![sentral mpu6500](https://cloud.githubusercontent.com/assets/6698410/8147322/5626d762-1219-11e5-9cda-015815a06b23.jpg)
-
Hi,
I am using sensor fusion board with ESP8266. Everything works exceptionally well. However, I am interested to get acceleration value along with yaw, pitch, and roll. When I try to put the senso…
afnan updated
6 years ago
-
Hi Kris,
Long after purchasing I finally had the time to start the AHRS part of my EFIS. Soldered the USFS on top of teensy 3.6 and with your sketch immediately got angles which seems right... for …
-
I've read (and learned a great deal from) a lot of your wiki. I have been playing with this sensor and was looking at the board on tindie and had a question on the ODR in fusion mode. Have you had a…
-
![sentralsystemlayout](https://cloud.githubusercontent.com/assets/6698410/12012827/e476fdc0-acbb-11e5-89df-b65732a6c6c0.jpg)
-
Dear Kris,
This is the second board I got from you that gives me this problem. The first one I got to use a couple times before this happened, the second one I had barely bought it and it gave me t…
-
Hi,
I am using your Ultimate sensor fusion board with your ESP32 board. I would be grateful if you can answer the following:
1. Even after proper calibration including an accelerometer, if you rotat…
afnan updated
6 years ago
-
So internal to the MPU-xxxx IMUs, there is this mystical "Digital Motion Processing" unit that does some sensor fusion. I looked through the code and didn't notice it being used. Supposedly it would t…
-
Hi,
somehow the Yaw/Mag Calibration is not working for me. I'm using the EM71280_MPU9250_BMP280_M24512DFC_WS_Acc_Cal.ino Sketch. I'm waving the device in an figure 8 motion, and after some time when …
-
Hi Kris,
I’m using the teensy 3.5 and the e7180 and using this code while most output looks good my altitude based reading are off by quite a bit... aka I’m at approx 190m (according to google) yet m…