-
i am trying to Ethernet( ENC28J60 ) configuration with pico rp2040 as per https://github.com/OpenLightingProject/rp2040-dmxsun/compare/main...kripton:ethernet) but get error..
![Screenshot from 202…
-
I had run 6lbr lite on LAUNCHXL-CC1310 with ENC28J60. Is it possible to enable IP64 on LAUNCHXL-CC1310 running 6lbr lite?
-
I use ATmega328-based Arduino & ENC28J60 (revision 6) & Arduino_UIP (fix_errata12) in my hobby project for a long time. My device(s) handles requests from the monitoring service (Zabbix). But i can't…
-
I'm using ENC28J60 module with Raspberry Pi Pico microcontroller.
How can we set the IP address to the ethernet module using micropython?
After assigning, how can we access the network socket usin…
-
### Basic Infos
- [X] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [ ] I have read the documentation at [readthedocs](https://ardu…
pvrfr updated
3 years ago
-
The Hardware hast an [enc28j60 ethernet controller](https://www.microchip.com/wwwproducts/en/en022889) on the PCB, but currently the firmware does not support it.
-
Hi,
I have a NodeJS ws server running and my ESP8266 connected to ENC28J60 acts as a websocket client. The connection gets established and everything works fine initially. But after 20 to 30 min th…
-
Hello,
I read about your problem with this project on the ChibiOS forum.
I wonder if you eventually came up with a fix? I'm trying to get a STM32 + ENC28J60 working as well.
Thanks!
-
First of all, thank you always for the good data.
After this update, an error occurred as follows.
esp32 = 3.0.1 is currently installed
ESP32-ENC28J60 = 2.0.0 is installed.
c:\Users\ATOZSYSTEM…
-
Hello,
would it be possible to use the library with an Arduino Uno / Nano with a wired connection made by an Ethernet-Shield with either an ENC28J60- or a WIZ5x00-Chip?
Thank's in advance
Was…