-
hi Jyers, i have an ender3 v2 with V4.2.3main board,ican't find any firmware.
and i find the different between 4.2.2and4.2.3 from marlin documents
/**
* CREALITY v4.2.3 (STM32F103RE / STM32F103…
-
### Description
It would be great if a preview of the model could be displayed before printing it.
Does anyone know if there are libraries available to render gcode as a 3d model?
I'll look into wh…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
I tried to install "Ender3V2-422-BLTUBL-MPC-20240125.bin" with an 8gb card and now it's stuck a…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
Cure depreciated several scripts from: https://github.com/mriscoc/Ender3V2S1/wiki/Calibration-Gu…
-
### Did you test with a precompiled firmware?
Yes, and the problem still exists.
### Bug Description
I am printing the speed calibration from teaching tech: https://teachingtechyt.github.io/calibra…
-
#### Version of Octolapse
Octolapse Version: 0.4.1+u.d33011e
#### Version of OctoPrint
OctoPrint Version: 1.8.2
#### When you ran into the problem, did you have diagnostic l…
-
### Application Version
4.10.0
### Platform
Linux
### Printer
Ender 3v2
### Reproduction steps
- print "One at a Time".
- place a small object in the front right (which has to be printed last)…
-
i'm hoping to use this plugin to create awesome timelapses. Now the thing is, there's plenty CR-10 profiles in the list but not one for the CR-10 Max. So which one do i pick for the optimum result?
-
#### What were you doing?
1. Create a python script that loops indefinitely "801.py"
2. Create a GCODE System Command (801) with the following command: /usr/bin/python3 /path/to/script/801…
-
Recently installed octo4a on an old lg phone running android 5.1.1 and am unable to connect it to my ender 3v2 with the 4.2.7 motherboard. I have verified that the cables and otg spitter work correctl…