-
Sometimes, you want to write a script which turns on a device, and leaves it on. Let's say you have a cron job to check something periodically, and control a device accordingly. Rather than have the s…
-
Hi David,
I've built a Bottle-based rest api around the python code controlling my MiHO005s at home, and I've written a little iOS App to interface with it. Working great!
Only thing I haven't qu…
-
Initial testing of SET_REPORTING_INTERVAL command for the thermostat, provided by energenie support, has led to inconsistent results.
The message only seems to gets processed by the thermostat (i.e…
-
### UPDATE
I was wrong on one point. "Some MQTT entities have an entity name equal to the device name. This is not expected. The entity name is set to `null` as a work-a-round to avoid a duplicate …
-
Can you point me where to start to write driver/sub_driver for the Eurocase EA200LED 1200VA?
I have collected USB communication (Send/Receive on beginning of line are not part of comm) :
```
> [\x80\…
-
The sensor SDS011 delivered incorrect measured values. The new sensor now shows this behavior after less than a year. The picture of the measured values shows the behavior best. Every day for a certai…
-
Update 2017/04/30:
Working on Raspberry Pi, ESP8266, and Arduino (tested).
Use:
`git clone -b protocollessreceiver https://github.com/Martin-Laclaustra/rc-switch.git`
Among the examples, the sketc…
-
I note, if the MQTT server is unavailable, such as it's rebooting or temporarily offline, then the mqtt-energenie-ener314rt.service will exit after trying to connect 7 times and must be restarted.
…
-
Ensure that a request to turn on/off a MIHO005 Smart Plug+ has succeeded by checking the returned state. This is to reproduce the 'Retry Tx' option already available in [node-red-contrib-energenie-en…
-
I am trying out mqtt-energenie-ener314rt via the command line, for example :-
mosquitto_pub -h 192.xxx.xxx.xxx -p 1883 -q 2 -t eng/ook/504718/1/command -m "on".
I am only able to successfully t…