-
### Open5GS Release, Revision, or Tag
v2.6.6-10-g79d3c70
### Steps to reproduce
according to 3GPP TS 29.503 section 5.2.2.2.2 Slice Selection Subscription Data Retrieval, the udm should reply with …
-
I have installed the BladeRF driver from source through this link https://github.com/Nuand/bladeRF/wiki/Getting-Started%3A-Linux
Then I have installed srsRAN from source through https://docs.srsran.…
-
Error: std::out_of_range: map::at -- in module (LteMacEnbRealistic)
This error occurs when running a few mobile UEs between two eNBs, each ue receiving DL data. The simulation will run normally, pe…
-
- [x] Carrier frequency: use default --> LTE Band 1 (Upload is 1930 MHz, Download is 2120 MHz)
- paper uses 2.6 GHz, but path loss eq. is for 2 GHz
- [x] Path loss model: 128.1 + 37.6 log10d (fo…
-
I am working with OpenNet framework, trying to set up a topology based on WIFI and LTE. For the moment, I have deployed an scenario with an LTE (2 UEs and a single eNodeB) and WIFI ( 2 STAs and a sing…
-
### Open5GS Release, Revision, or Tag
v2.7.1
### Steps to reproduce
A crafted PFCP packet can be flooded to the SMF from any UE, which will result in a PDU session rejection after that. The SMF lo…
-
### Open5GS Release, Revision, or Tag
v2.7.1
### Steps to reproduce
A crafted PFCP packet can be flooded to the UPF from any UE, which will result in a PDU session rejection after that. The SMF log…
-
## Issue Description ##
Unable to connect the eNode B for setup 5G SA End-to-End configuration. But its working fine with srsRAN 4G with ZMQ Virtual Radios
## Setup Details ##
Ubuntu 20.04.6…
-
Hi. You have an incorrect link in the readme.
`Please review this report for implementation https://github.com/SAIRISAN123/srsRAN_4G_Public_Warning_System`
Did you launch this code? I haven't us…
-
Hello,
I tried to follow what you describe for using an external nova 227 baicells enb (all is working with an ursp b210 and srslte)
I applied all your stated modifications to config
But I wa…