-
Hi.
I have Just installer my presence sensor, and i have som problems with it. First, it does not seem to register Any alarm for mmwave sensor on the homey app. But when activating the led indikator …
-
# Bug report
## Describe the bug
Altleast since the introduction of bitmap_screen there are some unwanted reboots. Especially on a planed reboot the display stays in a boot loop.
There is…
-
### The problem
The issue starts to happen after upgrading to ESPHome 2024.5.0.
My LD2410 presence sensors are working fine with version 2024.4.2.
The firmware compilation log is attached: [log…
-
### The problem
ESP8266 with DS18B20 sensor installed and working with Initial (local) install via PC over USB.
Installed in remote location and was working OK. (Should have left along).
Wanted to…
-
# Bug report
Thanks for this repo but the Blueprints I’ve tried all show me this error.
![image](https://user-images.githubusercontent.com/254309/236697531-8dc069ae-ff85-4208-b678-35e37911a13f.j…
-
Hej Paweł, zrobiłem ten logger na nodemcu zamiast ESP07. Widzę wszystkie encje w HA, ale ze statusem "nieznany" (oprócz sekcji Diagnostyka, tam encje są ok). Czy jakieś zmiany w kodzie ESPHome trzeba …
-
**Describe the problem you have/What new integration you would like**
Request support in ESPHome for SONOFF NSPanel touchscreen display by ITead = ESP32 based with custom Nextion HMI screen:
…
Hedda updated
3 months ago
-
I've just started exploring ESP RAINMAKER. I do not have clear requirements, or how the cloud system, esp nodes, and Home Assistant (HA) should work. still, I'm thinking about the possibilities.
I …
-
### PROBLEM DESCRIPTION
Recently saw a longer duration on ftf upload to nspanel. Specifically after reaching about 4MB the speed would go to almost zero taking about 20h to complete.
Now this …
-
## Do not report new issues related to this message, instead please comment on this issue with the logs that you see and the config for that component.
### The problem
```
[00:00:00][W][compone…