-
Hi,
First off I want to thankyou for incorporating the ESP into the Arduino IDE!
I have a www.doit.am esp12e devkit module with the motor shield board.
it programs fine with the Arduino IDE. Board es…
-
After flashing a file compiled using Custom.h, the access point does not appear, the STA mode is turned on.
If you compile the normal version, the access point works
I used esp8266
INIT : Boo…
-
I see that there is some activity here: https://github.com/jakeday/linux-surface/issues/145
I think it's better to trace it here isn't it ?
Best,
Jerome
---
Maintainer note: [There is a B…
-
I went through the topics and did not find an answer to my question, how to reboot ESP-RFID via MQTT in Home Assistant? I tried it and it didn't work out
* '{ "send":"restart"}'
* '{ "send":"resta…
-
Hi,
I have the Mijia branded pet feeder (XWPF01MG) - "[urn:miot-spec-v2:device:pet-feeder:0000A06C:mmgg-petfeeder:1](https://home.miot-spec.com/spec/mmgg.feeder.petfeeder)".
The XIAOWAN branded …
-
## Current Behavior
I keep getting this error pop up at random times and I will loose connection for about 10 seconds and it goes back online. It will run for hours and did it happens again. I don't …
-
Using version https://github.com/esprfid/esp-rfid/releases/tag/1.3.3, on NodeMCU Lolin and RFID reader RC522.
All RFID cards are recognized correctly, but the access log is empty.
I am a develope…
-
## Describe the bug
I start charging the car and configure for example 12 A as load current.
In the web interface, everything looks fine, but the power meter still just shows 1,4 kW (car only sup…
-
There are multiple reports that on NodeMCU boards have an issue about not getting out of boot loop.
- [ ] Detect boot loop, escape somehow. e
- [ ] Refactor C pointers, string duplication/copying,…
-
Hi There,
I have been trying sometime to connect the NFC reader HW-147 but failing so far.
I have getting it to work succesfully on a esp 8266 with the following code.
```
#include
#inclu…