-
Hi,
I'm just testing the new [ESP32-S2 dev module](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/hw-reference/esp32s2/user-guide-saola-1-v1.2.html). Is ESP32-s2 supported? Because the…
-
Hi, I had an ESP8266 ESP-12 wifi module and this project just has 01, 07 model, could you help me, thanks!
-
Hi,
Thank you for your support for Bouffalo MCUs in Arduino IDE
I got this dev kit from AiThinker. I get the Done Uploading message when uploading any sketch, but the board isn't doing anything…
-
### Basic Infos
- [X] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [X] I have read the documentation at [readthedocs](https://ardu…
-
Hello,
I was wondering if you can add support for this device:
https://vi.aliexpress.com/i/1005006109579911.html
I have the device and I can be a tester for it but I do not know from where to s…
-
I'm just in the middle of an experiment to piggyback a TTGO T-micro32 board onto the YAWL board... uses an adapter PCB which maps the pins from the ESP12-F footprint to the ESP32.... not tested, but w…
-
This is less of an issue and more of a hardware revision.
I have been working on a version of the PCB that is almost fully turn-key,
The fully assembled PCB can be ordered from JLCPCB, PCBway, etc…
-
### Basic Infos
- [X] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [X] I have read the documentation at [readthedocs](https://arduin…
-
Hey guys!
I have seen some posts and read some threads about this issue and I wanted to ask once and for all.
I understand this issue is mainly because wifi interrupts causing fastled to flicker t…
-
While preparing to add the RI line from the ESP12F to the userport I was decided to check that GPIO14 was transitioning with each ring. It was, however it happens so quickly that my logic probe barely…