-
task issue as follow
- [x] combine IDF and scons --targe=cmake build system
- [x] porting drv_gpio.c with cmake system
- [x] porting drv_uart.c with cmake system
- [x] porting drv_iic.c with cma…
-
In my place, I can only buy one of 3 model: ESP32-S3: N8R2, N8R8 or N16R8.
https://shopee.vn/Esp32-ESP32-C3-ESP32-S3-WiFi-Bluetooth-Internet-B%E1%BA%A3ng-ph%C3%A1t-tri%E1%BB%83n-Type-C-k%C3%A9p-B%E1%…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
For some reason I can't get the build environment set up. Is it using PlatformIO or the native ESP IDF extension? Is it possible to provide the prebuilt firmware for the ESP32-C3?
-
### Port, board and/or hardware
esp32 port
### MicroPython version
MicroPython v1.23.0 on 2024-06-02; LOLIN_C3_MINI with ESP32-C3FH4
MicroPython v1.23.0 on 2024-06-02; LOLIN_S2_MINI with ESP…
-
- Arduino board: ESP32-C3 based Boards (tested on an ESP32-C3 Devkit, but I'm willing to bet it affects the QT Py ESP32-C3)
- Arduino IDE version: 2.2.1
- ESP32 Library version 3.0.0-Alpha
- …
-
I am trying to use a ESP32-C3 as a BLE peripheral. Could this library add support for ESP32-C3?
-
I use the last build and comile for ESP32_C3 with
python3 make.py esp32 submodules clean mpy_cross BOARD=ESP32_GENERIC_C3 DISPLAY=st7789
firmware compiles without error, upload to board without erro…
-
[Micropython](https://github.com/micropython/micropython) already supports [ESP32, ESP32-S2, ESP32-C3, ESP32-S3](https://www.espressif.com/en/products/socs).
However [lv_micropython](https://github.c…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration i…