-
### The problem
Running ESPHome 2024.9.2 in a docker. 9 devices connected. The ones based on ESP8266 stay online/mDNS keeps on working, the ESP32 all drop off after some amount of time. When I reboot…
-
It doesn't happen too often, but if my internet is out, I'm unable to control the EVSE as usual. (workaround was to set phone as hotspot set to the EVSE's expected network, and at least turn on the c…
-
Hi,
I've got the Levoit Vital 100S and 200S devices. I am very keen to use them with esphome.
I am more than happy to disassemble them and do some soldering.
Could you please outline the steps…
-
### The problem
I had an ESP32 S3 Box with the voice assistant firmware. I had it adopted in the ESPHome dashboard, which added an encryption key, and it was configured in Home Assistant. The ESPHome…
-
**Describe the problem you have/What new integration you would like**
I run ESPHome in docker on my server in a closet. This makes it difficult to do initial flashing of new devices. Currently …
-
**Describe the problem you have/What new integration you would like**
Since I use esphome already quite a long time, I already have a lot of devices, some are productive, some only quick tryo…
-
### What happened?
When e.g. rebooting my wifi accesspoints (Mikrotik Devices) in the network the OpenDTU-Esp32 does not reconnect to the network. All esphome devices are fine with that.
### To Re…
-
With the latest version of ESPHome, the v3 devices page can be used via config:
```yaml
web_server:
version: 3
```
If you do not have the latest version of ESPHome installed, the v3 devices …
-
I love what's being done here and have a request. I am trying to learn Both ESPHome and LVGL for use on one of these devices. Could someone come up with a simple example that uses these together?
S…
-
Hello,
I am spending a lot of time getting this device working with esphome. My whole esp ecosystem has moved from platformio to esphome because it is so much more simple and powerful to get stuff g…