-
### Describe the bug
Since my Linksys WHW03 V2 APs use the SNAPSHOT release, they can only boot successfully if a cable is connected to one of the 2 ethernet ports. This is not very convenient becaus…
-
### Description of the problem
> Replace this line with your answer.
### Description of your products
> - the product name of your NAS model
> - and output of ``uname -a`` command
> …
-
### Describe the bug
I have flash latest snapshot to my Rock64 SBC.
SD: working as expected
EMMC: not working
I attached log below:
```
U-Boot 2024.07-OpenWrt-r27300-e7ea93e1e3 (Sep 05 2024 - …
-
The BB-RS232 module is getting hard to find and very expensive. I tried an experiment where I used a generic [Serial to Ethernet](https://www.amazon.com/dp/B087J9F6LF) server and was able to communica…
-
### Describe the bug
Doing the standard sysupgrade on 22.03.3 to 22.03.4 (keeping existing config) and waiting for the reboot. The system does not reboot in the sense that I see the linksys logo blin…
-
### Issue Description
When running snappi tests on cross LC scenario, packet drops are observed.
Failed test cases:
test_global_pause
```
snappi_tests/multidut/pfc/test_multidut_global_paus…
-
Running on a newly installed (running for 3+ days) 19.07.3 build and when I looked at the kernel log, found the following:
```
[34464.091643] ------------[ cut here ]------------
[34464.096303] W…
-
When system tried to boot with upstream PNOR, by the time it reaches to petitboot previous boot time console data(Skiboot and Skiroot messages) is getting overwritten with petitboot UI.
So users will…
-
I want to add support for the `dp83848` Ethernet module from Texas Instruments, but after searching through the forum and the docs - I found no description of what is necessary to accomplish that.
…
-
In tests/common/snappi_tests/snappi_fixtures.py file, the asic_port_map is hard coded to two asics.
Following code needs to be enhanced to generate asic_port_map based on DUT.
```
def get_multi…