-
Here is a script that allow to only install kernel and boot, to upgrade/downgrade an existing system and don't have to format the whole fs.
```
commit 85b9eeb7bc0121849fc7be4e5e6d9d19b36f115f
Auth…
-
Dear Allied Vision Support,
I got the following error during the installation of the Jetpack-5.1.2 based firmware built from scratch for Orin NX :
```
Starting bootloader post-install procedur…
l4es updated
8 months ago
-
Hello,
I am trying to use the VimbaPythonAPI with an Allied Vision ALVIUM 1800 U-1236c color camera alongside with a jetson nano.
I've written a asynchronous acquisition script and it runs just fine…
-
I tried to replace LE10 to LE11 but after sd card creation with "LibreELEC USB-SD Creator" LE11 can't start because of error:
*** Error in mount_flash: mount_common: Could not mount UUID=1803-1707 …
-
Rock64 was working great on 4.4.120-rockchip-ayufan-213
Then updated by doing sudo apt-get dist-upgrade and now I can't seem to boot anymore.
Please help since I was stupid enough not to make a ba…
-
I built an image for the poplar board with the layer meta-96boards and I ended with this products on the deploy dir:
```
$ ls -1sh tmp/deploy/images/poplar/
total 63M
16M boot-4.9+git0+e153b53cbd…
-
I have the milkv pioneer board and installed nixos on it. The contents of my `/boot/extlinux/extlinux.conf` includes bootargs for outputting on `ttyS0`
```
APPEND init=/nix/store/3xsvpmg37mcky27my30…
-
Hello,
I'm using genimage 15 (through buildroot 2022.02.8) and specifying an image size in % does not seem to work.
My configuration file is:
```
image boot.vfat {
vfat {
files = {
"zImag…
Zlika updated
10 months ago
-
## Regression
@atishp04 reported regression with https://github.com/starfive-tech/u-boot/tree/Fedora_VIC_7100_2021.04 branch after commit https://github.com/starfive-tech/u-boot/pull/20/commits/985c9…
-
Hi, I downloaded the provided image and flashed it onto …