-
This issue seems to affect all adapters supporting hardware flow control, even though the below uses the SkyConnect as example.
The SkyConnect has been exhibiting strange behaviors regarding hardwa…
-
### What happened?
Clicked to check for updates for all devices (`Check all` button) and found nodejs crashed like this:
```
Zigbee2MQTT:info 2024-01-31 17:58:39: MQTT publish: topic 'zigbee2mqtt/…
-
I'm trying to flash a Silab MGM210PA32JIA2 module (same used in the Yellow) connected to a raspberry pi 4.
the module is connected to the pi this way:
```
GPIO 8: TX
GPIO 9: RX
GPIO 10: CTS
GPIO…
-
Hi,
The EZSP version used is stored as static variable:
```
/**
* The current version of EZSP being used
*/
protected static int ezspVersion = EZSP_MIN_VERSION;
```
Whe…
-
@xsp1989 do you expect to compile new version with 7.3.2 or 7.4.0?
Just a small apart dunno if this is the correct place to post it... this new versions working together with last z2m should suppor…
-
For over a month, all 3 of the Coordinator Backup commands return error: "getKey not found in Commands". It worked in an earlier version of HAOS, but I don't know the exact version when the error fir…
-
### What happened?
After updating the FW for my Sonoff Dongle-E to 7.4.2 and the zigbee2mqtt container to 1.38.0 I'm no longer able to control any devices and the container will restart after a few m…
-
### Link
https://www.ezviz.com/product/T10C/42454
### Database entry
{"id":18,"type":"EndDevice","ieeeAddr":"0xa4c1384dbcbbfd0d","nwkAddr":40530,"manufId":4451,"manufName":"EZVIZ","powerSource":"Ba…
-
### What happened?
Some devices disappear or they are being disconnected from the network randomly for a long time. Then only part of them appears back again.
One of the most problematic devices …
-
### What happened?
I have TS0505B Tuya Light.
When i set light.turn_on, it ignores the default set transition time, fades in over 1 second, then immedtly turns off.
If i then issue the exact sa…